Your own bowser, on your own site.

This is the 5,000L tank with the dispensing side already sorted. It arrives with a PIUSI Cube 70/33 pump kit fitted, plumbed and ready — plug it into standard single-phase 240V power and you’re fuelling.

70 litres a minute through a 4m × 1" hose, with an automatic shut-off nozzle that stops when the machine’s full rather than when you notice. A K33 mechanical meter tracks what you’ve put in to within ±1%, so you can allocate fuel by machine, job or paddock instead of guessing at the end of the month.

The pump itself is a self-priming vane pump with bypass, sitting on anti-vibration mounts, driven by an induction motor with thermal overload protection. It’s IP55 rated for outdoor mounting and runs below 75 dB, which matters more than you’d think when you’re standing next to it several times a day.

Underneath all that is the same tank: one-piece rotationally moulded diesel-grade poly, nothing inside to rust, no seams to split.

And it’s built to keep water out of your fuel. The lid is poly welded shut — no cap to leave off, no seal to perish. The vent sits on a 300mm riser so rain can’t splash in. A water separator filter is plumbed into the dispensing line, so the last thing fuel passes through before it reaches your injectors is a filter built to pull water out of it.

Made in Australia. Moulded at our Tamworth facility, backed by a 5 year warranty, and built to AS/NZS 4766.