• AS1546.1:1998 tested and approved
• Injection moulded polypropylene with UV stabilised lid
• Lightweight yet strong
• Partitioned type required in NSW for septic use - check your local Council requirements
• Non partitioned type suitable for underground tank
• 15 year warranty

Dimensions

• Overall tank height - 1875mm
• Top diameter - 1880mm
• Weight - UST3000P: 137kg   - UST3000: 130kg

• Full protection for your pump from the weather
• Fully ventilated - will not cause overheating
• Available in all colours to match your tank
  

The new DIVERTRON 1200 pump and Rainsaver is what installers have been waiting for!

• No float switch required in the tank as electronic controls are built into the pump
• No additional holes for sensors, adjusting of float heights etc
• Super long electrical cable to pump suits most sites - 15M!
• Changeover device (designed for wall mounting) operates on water pressure only and can be installed any distance from the tank! No extra wiring connections required!
• Multistage submersible pump offers superior pressure and flow rates

• 70 litre capacity suited to rainwater tanks from 2200 litre and larger (excludes Slimline tanks)
• Simple and effective operation
• Easy to fit to your Rapid Plas tank
• Automatic draining - ready to use every time it rains
• Available in all colours to match your tank

• Heavy duty frames made from galvanised steel for durability
• Treated timber decking gives optimum tank support
• Legs can be bolted down

• Manufactured from stainless steel mesh & heavy duty poly - durable and long lasting
• Easy to install - fits over existing 400mm strainer (RTS001)
• RTSCS1 also fits the new (February 2010) 500mm Rimmed Strainer (RTS004)
• Unique dome-shaped design keeps out leaves and debris and is self-cleaning
• Helps eliminate health risks - Food Grade & 100% UV stabilised
• 2 x 100 micron filter mats supplied with screen (Can also be ordered separately)

• The new RTS004 replaces the existing RTS005 (500mm Strainer).
• Made in Australia of superior materials, this unique design features a 500mm rim with the standard 400mm strainer moulded in one piece.
• The RTSDC1 cover fits this strainer, which is now supplied without premade holes, but with two “knock-outs” which can be removed as required.
• These new products are both flexible and UV stabilised to withstand the elements.

• Rapidseals enable a watertight connection through tank walls
• Rapidseals provide a quick and easy solution - suitable for use as overflows and tank connection systems
• Rapidseals can be fitted through corrugations as well as slight curves in tank walls - does not need a completely flat surface

• Other sizes of Banjo valves are available

• 90mm PVC Downpipe Diverter Kit
• Automatic operation
• Suitable to use with the smaller rainwater tanks or the slimline range
• Amount of water diverted can be customised according to the surface area of your roof
• This kit contains all the components required to convert your downpipe to a first flush diverter (excludes 90mm pipe)
• Can be incorporated into any 90mm pipe system

• Seals directly to the tank
• Utilises a reliable float system
• Suitable for all existing and new tanks
• No batteries or wiring required
• Easy to read dial face with adjustable empty and full indicators

• Ultrasonic tank level monitor
• Wireless measurement device allows accurate monitoring of the level of your tank from indoors
• Up to 200m range
• Simple to install
• Also suitable for molasses tanks

• Easily adjusted (using the patented Uni-Ball joint) to any water tank roof angle
• Suitable for all tanks
• Manufactured from UV resistant premium quality materials
• Stainless steel rod in 2 x 1m sections

• Supplied with a 300mm riser as standard, other lengths available by request.
• Supplied fitted if ordered with a tank (Specify required position).

• Housing has 3/4” inlet and outlet ports
• Easily connected - can be used in either single or double installation
• Choice of 2 filter cartridges:
  RT0P5 – sediment only – filters suspended particles down to 5 microns
  RTSC1 – silver carbon – filters dirt, rust, sediment, taste and odour
• Replacement cartridges available

• Detachable roof
• Off-set opening offers protection from weather
• Durable poly
• Standard colours: Beige Roof with Beige, Heritage Green or Heritage Red Base. 

• One piece construction
• Off-set opening offers protection from weather
• Standard colours: Beige, Heritage Green, Heritage Red.

• One piece construction
• Durable poly
• Standard colours: Beige, Heritage Green, Heritage Red. 

• Holds 1¼ bags of chaff
• Hinged lid - easy access, yet secure storage
• Rust free poly construction
• Available in standard green or in the popular colour range
  - red, purple, blue, pink or yellow
• Space saving modular design

• Smooth lightweight poly
• One piece moulding – no separate parts
• Available in 5 colours – green, red, blue, yellow & white

• Two sizes - multiple uses
• Free standing - no need for extra supports
• Check your stock levels at a glance
• Easy to access
• Modules bolt together for easy installation and additions

• Strong durable poly construction
• Fits neatly over 500 litre and 1000 litre round troughs
• Stops feed from being spoiled by the weather

• Excellent environment for litters
• Easy to clean
• Rust free poly construction

• Hygienic and easy to clean
• High strength - spans 1200mm pits
• Corrosive free
• Light weight and easy to install
• Maintains consistent temperature
• Excellent wear resistance

New PTA87 Bung Spanner for PTA81, PTA83 and PTA83C.

Suits the bungs as pictured.