|
Description:
- Linch pin secures float to prevent damage
- Float enclosure moulded as part of the trough
- Raised float allows trough to fill completely
- All pipework protected by trough surround
- 2" drain bung for easy cleaning
- Fitted with 1" high pressure, high flow valve
- PTTU44W & PTTU46W also available with 2" float (code: PTF50S) - optional upgrade at an extra cost of $224.90
Description:
- Extra heavy duty molasses grade troughs ideally suited to supplementary feeding
- Durable, heavy duty trough, easily relocated
- 2” drain bung for easy cleaning
- 3 sizes available
Description:
- Tough and durable with a long history of use on farms
- Light and easy to move around - excellent for drovers
- Smooth finish with 2” drain bung for easy cleaning
- Colour choice of green or black
- Available with or without float valve or cover
Description:
- Large 500L capacity
- Durable roof with substantial overhang to protect feed from the elements
- Roof swings right back to allow easy filling
Description:
- Weather proof – feed is protected from the elements, but still accessible to the stock
- Easy access for large numbers of cattle
- Durable & rust free
- Stackable for easy storage (with rubber removed)
- NEW! 2 sizes available for all applications - 250 Litres & 120 Litres
- NEW! Skid for 250L feeder
Description:
- Stock safe removable cover allows easy access to float for adjustments
- Cover positively located and attached to prevent stock damage
- Simple design and operation
- Easy to install
- Curved profile for strength
- Mounting location allows complete filling of trough
- 1” float valve standard
- Will accommodate up to 2” valve
Description:
- High Troughs (450mm) - recommended for cattle, horses etc
- Low Troughs (300mm) - recommended for sheep, goats etc
- Smooth interior with a 2” drain bung for easy cleaning.
- Peg down points at each end
- Available as either feed or water troughs
Description:
- One piece trough with fully protected 1” float system
- Centre mounted float - can service either side of a fence with one inlet
- 2” Drain bung at either end
- Raised cover allows trough to fill to the brim
- All poly, heavy duty, UV stabilised to withstand tough Australian conditions
Description:
- All poly, heavy duty, UV stabilised to withstand tough Australian conditions
- Corrosion resistant suitable for all types of feed including molasses and nitrogen mixes
- Wall cavity may be filled with water to increase stability
- 2” drain bung at both ends for easy cleaning
Description:
- Strong all-poly construction suitable for corrosive environments
- Light weight for ease of handling and relocation
- Smooth finish facilitates cleaning
- 4 sizes to choose from to meet all needs
- Covered float prevents stock damage
- Peg down points to prevent livestock pushing trough around
Description:
- Strong all-poly construction suitable for corrosive environments
- Light weight for ease of handling and relocation
- Smooth finish facilitates cleaning
- 4 sizes to choose from to meet all needs
- Covered float prevents stock damage
- Peg down points to prevent livestock pushing trough around
Description:
- Teat made from soft polyurethane
- Valve is removable to allow thorough cleaning of internal teat cavity
- Valve creates a high flow with minimal effort for training of calves
- When calves are trained the valve may be removed to encourage natural sucking
- New retained valve design - prevents valve from falling out during cleaning
Description:
- New teat design suitable for both kids and lambs
- Can be fitted to any Rapid Plas Calfaterias
- Also available with cap to suit soft drink bottles
Description:
- Guaranteed proven design to withstand sheep & cattle
- Internal plumbing prevents stock damage
- Supply of water is kept considerably cooler compared to troughs with no reservoir
- Designed for easy cleaning, with sweep out ramps
- Circular trough is easy for livestock to access. (In the case of the DCT22000, equates to a trough length of approximately 9.5 metres!)
- When it is empty, the DCT05500 can be easily transported on a trailer (Code: DCTT)
- Multi purpose – the tanks can be removed and used as a stand-alone rainwater tank
- Colours available: Mist green
Description:
- Durable UV stabilised polythylene for long outdoor life
- Rust free polyethylene will not corrode
- Smooth finish and 2" drain bung facilitates cleaning
Description:
- Strong durable poly construction
- Fits neatly over 500 litre and 1000 litre round troughs
- Stops feed from being spoiled by the weather
|
|